|
Above WCF28 shown. Below WCF32 Triple unit.
WCF - Tow Behind Model Working Overall Weight Working Tank Size Width Width Height WCF18 1.80m 2.05m (6’9”) 101kg 0-65cm 45 ltr WCF24 2.40m 2.65m (8’9”) 109kg 0-65cm 45 ltr WCF28 2.80m 3.05m (10’) 122kg 0-65cm 45 ltr WCF32 3.20m 3.45m (11’4”) 130kg 0-65cm 45 ltr WCF45 4.50m 4.75m (15’7”) 200kg 0-55cm optional WCF45ET 4.50m 4.75m (15’7”) 340kg 0-55cm optional
ET = End Tow unit
Standard Features – 1- 45l Custom made tank with HI volume 12v pump. (except WCF45 and WCF45ET) 2- Comes partially assembled. 3- Manual and all attaching hardware included. 1- Lance Kit 2- Foam Marker 3- Glove Holder 4- Jockey Wheel 5- Hand wash tank 6- Custom made wiring loom for tractors, utes etc 7- End Tow units for WCF28 and WCF32 Which model is for me? 1- How wide is my narrowest gate? – Look at overall width 2- How wide is my narrowest bridge? – Look at overall width 3- How wide are my race ways? - Look at overall width 4- How big are my paddocks? – Look at working width If you have large paddocks and small gateways, races or bridges, then an End tow unit is better as you can cover a larger area and still get through your gates. The WCF has been proven over many years and has been very successful in the control of many weeds. It is ideal in a paddock situation as it can be towed behind a Quad, Tractor or other farm vehicle. LMU290 Shown With Optional Hand wash Kit and Glove Holder. (Shown with 45 litre tank - now all supplied with 120 litre tank) LMU – 3 Point Linkage Mounted. Model Working Overall Weight Working Width Width Height LMU290 2.90m 3.0m (9’11”) 200kg Variable LMU600P 6.00m 6.3m (20’8”) 380kg Variable LMU600H 6.00m 6.3m (20’8”) 380kg Variable LMU290 Standard Features – 1- Hydraulic Drive. 2- 120l Tank with high volume 12v Pump. 3- Comes partially assembled. 4- Manual and all attaching hardware. LMU600 Standard Features – 1- 120 litre tank and two 12v high volume pumps. 2- Hydraulic Drive. 3- Comes partially assembled. 4- Manual and all attaching hardware. Options PTO Drive. LMU 290/600 1- Lance Kit. 2- Foam Marker (LMU290 requires a 12v Marker). 3- Glove Holder. 4- Hand wash tank. The LMU290 is an ideal unit for weed eradication in both pasture and crops, It will fit through most gateways, can carry up to 120l of herbicide, will get places where you can get a tractor but cant always tow a unit. Being hydraulically driven the roller is constantly rotating eliminating any dripping. (When used within instructions). The LMU600 range has been used very successfully for the eradication of weeds amongst crops and large pasture areas. They are ideally suited to horticulture and crops where tractors are required to get through the crop.
LMU600 Being Towed into the Paddock. LMU600 Being Used. LMU600 is shown with optional hand wash and glove holder. LMU600 will have 1 x 120 litre tank (shown with 2 x 45 litre tanks) Rotowiper® Accessories
FOAM MARKER Enables you see where you have been, especially helpful in dry conditions and large paddocks where you have no wheel tracks
JOCKEY WHEEL Enables the user to easily raise and lower there Rotowiper® onto the towing vehicle, even with a full herbicide tank.
GLOVE HOLDERS Enables you to store your gloves in an accessible place and keep them out of the dirt
HAND WASH Wash chemical residue from hands while in the field.
WIRING LOOMS These can be custom made to suit your application / vehicle.
LANCE KIT Enables the use of your Rotowiper® Tank and pump for spot spraying around trees, along fence lines etc
Rotowiper® Lance Kit. Rotowiper® Foam Marker.
Rotowiper® Hand Wash and Glove holder. Rotowiper® Jockey Wheel.
|
